For customized glove measurement instructions, click here

Important Notes:

1. When we make the boots, we will appropriately reserve 1cm-3cm safety margin on the basis of the measurement data you provide, which is used to prevent the situation of not being able to wear the boots due to the understanding or measurement error, if you especially like the tight feeling and you don’t want us to set up the margin, please make a clear note when you place the order ( to understand that this may cause the risk of boots bias small! )

2. Due to the handmade, coupled with the special elasticity of the leather, all finished boots and measurement data can not be completely accurate match, a small amount of deviation is normal. A small amount of deviation is normal A small amount of deviation is normal.

If you feel that you are having difficulty with your measurements, please click on this button and contact us directly through your preferred method to get our help!

For customized fit, please follow the instructions in the picture below to measure your leg shape and record the data

Please follow the example measurements in the image to the left

Knee High Boots & Thigh High Boots

Measurement Instructions:

Please bare legs and bare feet check stand on a flat surface, please use a soft leather ruler to measure. Please do not pull the tape measure too tight or too loose when measuring. The relevant alphanumeric data are described below:
Unit: centimeters – cm

A – footplate length
B – ankle height, fixed value 10 cm
BB – circumference of the ankle joint at a height of 10 centimeters from the ground
BBB — Heel-Back Circumference.
C — Height of the belly of the leg (thickest part) from the floor
CC – the circumference of the thickest part of the calf.
D – height of the center of the knee from the ground
DD — circumference of the leg at the center of the knee
G — Boot height (excluding heel)
GG – circumference of the thigh at the highest point of the boot shaft
F (optional) — height of the knee from the middle of the boot’s edge
FF (optional) – circumference of the leg midway between the knee and the edge of the boot shaft

Measurements have been taken. Go ahead and order.
Please follow the example measurements in the image to the left

knee-high boots

Measurement Instructions:

Please bare legs and bare feet check stand on a flat surface, please use a soft leather ruler to measure. Please do not pull the tape measure too tight or too loose when measuring. The relevant alphanumeric data are described below:
Unit: centimeters – cm

A – footplate length
B – Ankle height, fixed value 10cm
BB – circumference of the ankle joint at a height of 10 centimeters from the ground
BBB — Heel-Back Circumference.
C — Height of the belly of the leg (thickest part) from the floor
CC – the circumference of the thickest part of the calf.
G — boot height below the knee (excluding heel)
GG — circumference of the leg at the highest point of the boot below the knee
Note: The Data G boot height takes into account that your thighs won’t bend the boot when you sit down.
(as shown in TIPS)

Measurements have been taken. Go ahead and order.